Wireless Lan - Ricoh 5100WD General Settings Manual

1. Connecting the Machine
Menu
Interface Settings/Network
1
Interface Settings/Network
Interface Settings/Network
Interface Settings/Network
• For the Effective Protocol setting, check that the protocol you want to use is set to [Active].
• [LAN Type] is displayed when the wireless LAN board is installed. If Ethernet and wireless LAN are
both connected, the selected interface has priority.
• p.61 "Interface Settings"

Wireless LAN

This section lists the settings required for using the printer with a wireless LAN connection.
For details about how to specify the settings, see "Interface Settings".
Menu
Interface Settings/Network
Interface Settings/Network
Interface Settings/Network
Interface Settings/Network
Interface Settings/Network
Interface Settings/Network
Interface Settings/Network
Interface Settings/Network
Interface Settings/Network
Interface Settings/Network
22
User Tool
Permit SNMPv3 Communication
Permit SSL/TLS Communication
Host Name
Machine Name
User Tool
Machine IPv4 Address
IPv4 Gateway Address
Machine IPv6 Address
IPv6 Gateway Address
IPv6 Stateless Address
Autoconfiguration
DNS Configuration
DDNS Configuration
Domain Name
WINS Configuration
Effective Protocol
Setting Requirements
As required
As required
As required
As required
Setting Requirements
Necessary
As required
As required
As required
As required
As required
As required
As required
As required
Necessary