Leica IP C Instructions For Use Manual page 59

Instructions for storage
89
Transporting the printer
Leica IP C
(continued)
70
71
Fig. 66
If the printer is to be shipped, the storage instructions described above
are to be carried out completely. Then, additionally make the following
preparations:
• Open the hood (4 in
flash cover.
• Then take out the flash bulb. For more information, refer to
this manual
• Close the flash cover and the hood.
• Use original packaging and securely screw the printer to the baseplate
(see unpacking instructions).
• Reinsert the transport anchor
adhesive tape.
• Make sure that the instrument is only transported
6. Cleaning and Maintenance
• Likewise, clean the removed location plate (70)
with the sealing lip with (clean) alcohol and a
cleaning swab (89)
• The sealing lip (71) must be completely free of
ink residue. Check the sealing lip for damage.
Do not reuse a replacement plate with a dam-
aged sealing lip.
• Clean the instrument completely, as described
in this chapter.
Fig. 36) of the printer
(27) (see Fig.
(Fig. 66).
and loosen the screw of the
Chap. 4.6
16) and secure the hood with
upright.
of
59