Printer Driver Settings - Leica IP C Instructions For Use Manual

5.4 Printer driver settings

With the Leica IP C cassette printer you can print cassettes from any Windows application al-
lowing the user to individually configure the printing parameters. The description below refers
to Microsoft Wordpad, a program that is part of any Windows installation and therefore avail-
able on all PCs supported by the printer driver. The dialog boxes to be accessed in other pro-
grams may be named differently, but the driver parameters that need to be selected are named
identically in all programs.
The cassette type (angle 35° or 45°) selected in PAPER --> SIZE and the cassette type actually
used must match.
Otherwise, the print head can be damaged.
Leica IP C
Configure the printer in the application that will be used for imprinting the
cassettes.
1. Click on FILE --> PRINT to open the PRINT dialog box.
2. From the list of available printers, select Leica IP C (the name of that
printer was added when installing the printer driver, see
and confirm by pressing the corresponding button.
68
Fig. 51
1. First, the page settings must be selected:
Click on FILE --> PAGE SETUP to open the Page
Setup dialog box (Fig.
2. In MARGINS (inches), set all margins to "0""; the
print range (68) will change as shown in
3. In ORIENTATION, select PORTRAIT.
4. Once the printer has been set up as described
above, a cassette format will automatically be
shown in the SIZE input field in the PAPER dialog
box.
You can choose between two cassette formats
"cassette 35°" and "cassette 45°".
5. In the SOURCE input field you can select the
magazine(s) which will supply the cassettes to be
imprinted.
5. Operation
Chapter
51).
Fig.
4.10)
51.
49