Operation; Control Panel Functions - Leica IP C Instructions For Use Manual

5.1 Control panel functions

INK EMPTY LED
LED off:
Sufficient quantity of ink remaining—printing is
possible without any restrictions.
LED flashing:
Ink cartridge will be empty shortly—keep
replacement ink cartridge handy.
LED illuminates:
Ink cartridge empty, no further printing possible.
Leica IP C
The control panel
• consists of a membrane keyboard with six
pressure-sensitive keys (four of them with an
LED, two LED displays and a two-figure seven-
segment display.
• controls the printer functions and the print jobs
that are defined via the control software.
• indicates current printer status and processes
in progress.
• indicates errors and / or error messages.
• controls the (optional) automated unload sta-
tion.
MAG. EMPTY LED
LED off:
Magazines are full or up to that point no further
cassette has been requested from a magazine
that has just been emptied.
LED flashing:
Fig. 47
Flashing LED and number on display indicate
which magazine is empty.
If several magazines are emptied at the same
time, the corresponding magazine numbers are
indicated in a recurring sequence.
The printer will resume the interrupted print job
where previously left off.
5.
ð
After refilling the magazine,
LOADED must be pressed to inform
the printer that the magazine has
been refilled.

Operation

41