Leica IP C Instructions For Use Manual page 43

ONLINE
ERROR
Leica IP C
Interrupting a print job in progress.
LED on:
Printer is ready and waiting for a new print job.
LED flashing:
A data transmission is in progress or a print job is being carried out.
• Pressing ONLINE while a print job is in progress interrupts printing. The
current print job, however, is completed. The online LED goes out.
At that point the printer can be accessed (e.g. to remove a half-empty
magazine and refill it)
• To resume the previously interrupted print job, press ONLINE again. The
Online LED goes back on or—if there are still print jobs that have not
been completed—the LED starts flashing.
LED off:
No data transmission in progress. Either no print job is in progress or a print
job in progress has been temporarily interrupted.
Acknowledging an error code being displayed.
LED flashing:
An error has occurred.
The corresponding error message is being displayed.
If ERROR is pressed after having eliminated the source of an error and after
all obstacles in the processing areas have been removed, the printer re-
sumes normal operation and the error indication disappears.
If several errors occur simultaneously, the highest priority error code is
displayed first. After that error has been acknowledged by pressing ERROR,
the second highest priority error code is displayed and so on.
5. Operation
43