Leica IP C Instructions For Use Manual page 31

Filling and inserting the magazines
The following table shows which cassette size
should be used with which inserts.
Cassette size (length)
without lid or with
closed lid: > 41.3 mm Metal insert
without lid or with
closed lid: < 39.3 mm
with open lid: < 80.0 mm Without any insert
with open lid: < 77.3 mm Adhesive strip at
Filling the magazines
• First fill IP C magazines 4 to 6 with cassettes
and insert them.
• Then fill IP C magazines 1 to 3 with cassettes
and insert them (Fig.
Magazine
positions
on the
Printer
Leica IP C
(continued)
Insert
Metal strip and
adhesive strip at
front
front
31).
3
6
5 2
4 1
Fig. 31
When filling the magazines, no
gaps may exist between the
cassettes.
• When filling a magazine with cassettes, ensure
that the cassette side to be imprinted is to the
left after insertion.
• If cassettes are individually loaded, be certain
that they are aligned properly and that there
are no gaps between the cassettes.
• To achieve this, use your finger to carefully lift
the cassettes slightly from below, then release
them—they should then lie in the magazine
properly (see Fig.
4. Instrument Setup
32).
Fig. 32
31