Table of Contents
Advertisement
The "ADVANCED OPTIONS" menu
Clicking onto the individual menu items opens up
a pull-down menu to their right, where you can
select the desired parameters.
Any menu items not described here are of no im-
portance for the printer. Therefore, the standard
settings of all menu items not described here
should remain unchanged.
• PRINT QUALITY menu item
In this menu, you can select
whether an imprint is to
be applied onto a cassette
once (NORMAL) or twice
(OVERSTRIKE).
UPSIDE DOWN imprints are rotated 180°. Here
again, OVERSTRIKE can be selected.
Due to the higher ink consumption and
the substantially poorer printed image,
the OVERSTRIKE setting may not be
used.
Leica IP C
• In the PAPER SIZE menu you select the type
lected in PAGE SETUP
• The print head RESOLUTION can be switched
For such cassettes, 180 dpi should be selected.
• The PAPER/OUTPUT menu item is important
Fig. 53
• SAME TRAY:
cassettes keep being deposited onto a tray
until the tray is full.
• JOB IN NEW TRAY:
each print job starts with a new tray.
• NEW TRAY:
Only for special applications—do not select
this option under standard Windows pro-
grams.
When using the manual unloading
system, the values configured in the
PAPER/OUTPUT menu item are not
considered by the device.
5.
Operation
of cassette, i.e. the size of
the imprintable zone of the
cassette. The cassette type
selected in this menu should
be identical to the one se-
(Fig.
51).
between 360 and 180 dpi.
With cassette surfaces not
appropriate for 360 dpi reso-
lution, printing results will be
poor when selecting that.
above all for the multi-cas-
sette unload station.
51
Hide quick links:
Advertisement
Table of Contents
