Using The Dvd Drive - Getac B300 User Manual

Using the DVD Drive

Your computer may come with a Super Multi drive. The drive can read from
and write to CD, DVD+, DVD- and DVD-RAM media.
CAUTION:
When inserting a disc, do not use force.

Make sure that the disc is correctly inserted into the tray, and then close

the tray.
Do not leave the drive tray open. Also, avoid touching the lens in the

tray with your hand. If the lens becomes dirty, the drive may malfunction.
Do not wipe the lens using materials with rough surface (such as paper

towel). Instead, use a cotton swab to gently wipe the lens.
FDA regulations require the following statement for all laser-based devices:
"Caution, Use of controls or adjustments or performance of procedures
other than those specified herein may result in hazardous radiation
exposure."
NOTE: The DVD drive is classified as a Class 1 laser product. This label is
located on the DVD drive.
NOTE: For DVD and Combo drives only.
This product incorporates copyright protection technology that is protected
by method claims of certain U.S. patents and other intellectual property
rights owned by Macrovision Corporation and other rights owners. Use of
this copyright protection technology must be authorized by Macrovision
Corporation, and is intended for home and other limited viewing uses only
unless otherwise authorized by Macrovision Corporation. Reverse
engineering or disassembly is prohibited.
2-14
Operating Your Computer