Table of Contents
Advertisement
ShenZhen GETECH CO.,LTD
www.geeetech.com
http://www.ftdichip.com/Drivers/VCP.htm
Download and install, you can find the corresponding serial port in the Windows "Device
Manager":
1.3 Arduino IDE
In the process of using the printer you may need to re-upload the firmware, and the software you
need to use is Arduino IDE. About how to upload firmware
please refer to
FAQ.
2．
Connect the Printer
After the above software is installed, we can connect the printer to the computer. Plug the USB into
6
Advertisement
Table of Contents
Need help?
Do you have a question about the Duplicator 5 and is the answer not in the manual?
Questions and answers