Arduino Ide; Connect The Printer - Geeetech I3 X User Manual
Hide thumbs
Also See for I3 X:
- Building instructions (82 pages) ,
- Building instructions (94 pages) ,
- Manual (28 pages)
Table of Contents
Advertisement
ShenZhen GETECH CO.,LTD
www.geeetech.com
Download and install, you can find the corresponding serial port in the Windows "Device
Manager":
1.3 Arduino IDE
In the process of using the printer you may need to re-upload the firmware, and the software you
need to use is Arduino.
About how to upload firmware,
please refer to
FAQ.
2 Connect the Printer
After the above software is installed, we can connect the printer to the computer. Plug the USB into
the computer, open Repetier host, click the
icon in the top right corner, and the dialog
2
Advertisement
Table of Contents
Need help?
Do you have a question about the I3 X and is the answer not in the manual?