Download Print this page

Print With Dual-Extruder - Geeetech Duplicator 5 User Manual

Hide thumbs Also See for Duplicator 5:

Table of Contents

ShenZhen GETECH CO.,LTD

www.geeetech.com

7.2 Print with Dual-extruder

Actually, dual-extruder printing is to load two separate objects, and then separately print them with

the assigned extruder. Thus you can print objects with two colors. Click

here

to download .stl files

which can be used for dual-extruder printing:

two_colour_cube.stl.

After you download the model, load it to Repetier-Host, as shown in the following picture:

Table of Contents

Do you have a question about the Duplicator 5 and is the answer not in the manual?