Table of Contents
Advertisement
ShenZhen GETECH CO.,LTD
www.geeetech.com
Click [OK] to finish the setting.
6.2 Filament Setting
Set filament diameter and print temperature in the [Filament settings] tab. Filament we use here is
1.75mm PLA. Usually the temperature of the extrusion head is 195-210℃，and the temperature of
hotbed is 60-70℃. Here we set them as 200℃ and 65℃respectively.
6.3 Printer Setting
Set printer's hardware parameters in the Printer setting> General tab.
Bed shape: Rectangular
Size: 230*150
46
Advertisement
Table of Contents
Need help?
Do you have a question about the Duplicator 5 and is the answer not in the manual?
Questions and answers