Table of Contents
Advertisement
ShenZhen GETECH CO.,LTD
www.geeetech.com
3.2 Number of Extruder and Nozzle Diameter
The number of extruder is set as 2. The diameter of print head is set according to the actual size,
here is 0.4mm.
The distance between two extruders on X direction is 32mm, then set offset X -16 and 16mm. (You
can also set it, depending on actual measurement)
10
Advertisement
Table of Contents
Need help?
Do you have a question about the Duplicator 5 and is the answer not in the manual?
Questions and answers