Download Print this page

Print With One Extruder; Load Print Model - Geeetech Duplicator 5 User Manual

Hide thumbs Also See for Duplicator 5:

Table of Contents

ShenZhen GETECH CO.,LTD

www.geeetech.com

7.1 Print with one extruder

If you are new to 3D printing, you can try to print with only one extruder first. After getting familiar

with the whole process, you can try to use dual-extruder. Here we print a simple plate. You can

download

model file here:

plate.stl.

the

In the main interface of Repetier-Host, click the Load button

Choose the file you download

and open it.

Table of Contents

Do you have a question about the Duplicator 5 and is the answer not in the manual?