Danfoss VLT HVAC Basic Drive FC 101 Quick Manual page 49

Quick Guide
1 1
Maximum voltage on input
Input resistance, R
Digital input 29 as thermistor input
Analog inputs
Number of analog inputs
Terminal number
Terminal 53 mode
Terminal 54 mode
Voltage level
Input resistance, R
Max. voltage
Current level
Input resistance, R
Max. current
Analog output
Number of programmable analog outputs
Terminal number
Current range at analog output
Max. load to common at analog output
Max. voltage at analog output
Accuracy on analog output
Resolution on analog output
1) Terminal 42 and 45 can also be programmed as digital outputs.
Digital output
Number of digital outputs
Terminal number
Voltage level at digital output
Max. output current at digital output
Max. load at digital output
1) Terminals 42 and 45 can also be programmed as analog output.
Control card, RS-485 serial communication
Terminal number
Terminal number
Control card, 24 V DC output
Terminal number
Max. load enclosure frame H1-H8, I2-I8
Relay output
Programmable relay output
Relay 01 and 02
Max. terminal load (AC-1)
Max. terminal load (AC-15)
Max. terminal load (DC-1)
Max. terminal load (DC-13)
Max. terminal load (AC-1)
Max. terminal load (AC-15)
Max. terminal load (DC-1)
(NC) (Resistive load)
Environment according to EN 60664-1
1-46
VLT
i
i
i
1)
on 01-02/04-05 (NO) (Resistive load)
1)
on 01-02/04-05 (NO) (Inductive load @ cosφ 0.4)
1) on 01-02/04-05 (NO) (Resistive load)
1)
on 01-02/04-05 (NO) (Inductive load)
1)
on 01-03/04-06 (NC) (Resistive load)
1)
on 01-03/04-06 (NC) (Inductive load @ cosφ 0.4)
1) on 01-03/04-06
MG18A422 - VLT
®
HVAC Basic Drive Quick Guide
Min. terminal load on 01-03 (NC), 01-02 (NO) 24 V DC 10 mA, 24 V AC 20 mA
®
is a registered Danfoss trademark
Fault: >2.9 kΩ and no fault: <800 Ω
Parameter 6-19: 1=voltage, 0=current
Parameter 6-29: 1=voltage, 0=current
0/4 to 20 mA (scalable)
Max. error: 0.4% of full scale
68 (P, TX+, RX+), 69 (N, TX-, RX-)
61 Common for terminals 68 and 69
01-03 (NC), 01-02 (NO), 04-06 (NC), 04-05 (NO)
Overvoltage category III/pollution degree 2
28 V DC
Approx. 4 k
2
53, 54
0–10 V
approx. 10 kΩ
20 V
<500 Ω
29 mA
2
1)
42, 45
0/4–20 mA
500 Ω
17 V
10 bit
2
42, 45 1)
17 V
20 mA
1 kΩ
12
80 mA
2
250 V AC, 3 A
250 V AC, 0.2 A
30 V DC, 2 A
24 V DC, 0.1 A
250 V AC, 3 A
250 V AC, 0.2 A
30 V DC, 2 A