Auto Run Program; Info; Settings - SHOWTEC COMPACT POWER LIGHTSET 4 RGBW Manual

Compact Power Lightset 4 RGBW
08) Use the Up/Down buttons to set the speed between 001-100 and strobe frequency between 000-099.

3. Auto Run Program

With this menu you can activate the Auto run mode of the Compact Power Lightset 4 RGBW.
01) Press the Mode button on the device until the display shows
02) The Compact Power Lightset 4 RGBW will start automatically with its built-in program.

4. Info

With this menu you can view 2 info's about the device.
01) Press the Mode button until the display shows
02) Press the Setup button to open the menu.
03) Press the Up/Down buttons to choose
04) Press the Setup button to open the menu.
05) You can now see the current software version

5. Settings

With this menu you can adjust the settings of the device.
01) Press the Mode button until the display shows
02) Press the Setup button to open the menu.
03) Press the Up/Down buttons to choose between the 6 available options,
, and
04) Press the Setup button to open one of the 6 options.
05) In the submenu
buttons.
Ordercode: 30277
.
.
you can select one of the 4 dimming curves, by pressing the Up/Down
.
.
.
.
14
, , ,