Table of Contents
Advertisement
¥
Insert the batteries
(for correct +/-
direction,
see diagram).
Charging the battery
The correct charge status can only be displayed if the battery is first fully charged and
discharged.
¤
Place the handset in the base with its display
facing forward for 9 hours.
i
The handset must only be placed in the
designated E550/E550A base or the corre-
sponding charger.
i
• The handset is already registered with the base. If you have purchased a
model with multiple handsets, all handsets will already be registered with
the base. You do not need to register the handset again.
• After the first battery charge and discharge you may replace your handset in
its base after every call.
• Always repeat the charging and discharging procedure if you remove the
batteries from the handset and reinsert them.
• The batteries may warm up as they are charging. This is not dangerous.
After a time the charge capacity of the batteries will decrease for technical rea-
sons
1
2
¥
Fit the cover from the
top
.
1
¥
Then press the cover
until it clicks into place
.
2
First steps
3
To open the battery cover:
¥
Grip the notch on the
cover
and slide it
3
downwards
9 h
4
.
4
15
Advertisement
Table of Contents
