Basic Symbols; Intended Use; Improper Use - Hydac ContaminationSensor CS1220 VIMS Operating And Maintenance Instructions Manual

ContaminationSensor CS1000

Basic symbols

DANGER
WARNING
CAUTION

Intended use

The ContaminationSensor (CS) was developed for the continuous monitoring of
particulate contamination in hydraulic systems.
By determining the type, size and quantity of contamination, quality standards can
be verified and documented, and the required optimization measures can be
implemented.
Any other use shall be deemed not in keeping with the product's intended use. The
manufacturer is not liable for any damage resulting from this use.
Intended use of the product also includes:
Permanent monitoring of solid particle contamination in hydraulic and lubrication
•
systems
Maintaining adherence to all the instructions contained herein.
•

Improper use

Improper use may result in hazard to life and limb.
Examples of improper use:
Improper connection of the CS voltage and sensor cables.
•
Operation with non-approved fluids.
•
HYDAC Filter Systems GmbH
CS1000 CAT-VIMS3478916 en 2009-04-15.doc
NOTICE
en
General safety guidelines
DANGER denotes situations
which can lead to death if
safety precautions are not
observed.
WARNING denotes situations
which can lead to death if
safety precautions are not
observed.
CAUTION denotes situations
which can lead to severe
injuries if safety precautions
are not observed.
NOTICE denotes situations
which can lead to property
damage if safety precautions
are not observed.
Page 9 / 36
2009-04-15