Response Speed; Output Timing Delays - Banner Q3X Instruction Manual

Q3X Laser Contrast Sensor
• —minimum
• —10%
• —20%
• —30%
• —40%
• —50%
Dark Set options:
• —minimum
• —25%
• —50%
• —100%
• —200%

3.1.4 Response Speed

Use this menu to select the response speed. The default is 1 millisecond.
• —250 microseconds
• —1 millisecond
• —5 milliseconds
Table 1: Tradeoffs
Response Speed
250 µs
1 ms
5 ms
25 ms (Master-Slave Sync)

3.1.5 Output Timing Delays

Use this menu to select the output timing delay to be set. Only one delay type can be used at a time. The default is no
delay.
• —No delay
• —Enables simultaneous on and off delay timers
• —One-shot. Enables a one-shot, fixed output pulse duration
10
Repeatability Crosstalk Immunity
60 µs Disabled
300 µs Enabled
520 µs Enabled
Best for direct line of sight
13 ms
crosstalk
www.bannerengineering.com - Tel: 763.544.3164
High Efficiency Light Rejection
Disabled
Disabled
Enabled
Enabled