Event Counter Cntggio; Identification; Application; Setting Guidelines - ABB REQ650 Applications Manual

1MRK 505 291-UEN A
12.5
12.5.1
12.5.2
12.5.3
12.6
12.6.1
12.6.2
Application manual

Event counter CNTGGIO

Identification

Function description

Event counter

Application

Event counter (CNTGGIO) has six counters which are used for storing the number of
times each counter has been activated. CNTGGIO can be used to count how many
times a specific function, for example the tripping logic, has issued a trip signal. All
six counters have a common blocking and resetting feature.

Setting guidelines

Operation: Sets the operation of Event counter (CNTGGIO) On or Off.

Limit counter L4UFCNT

Function description
Function description
Limit counter
Application
Limit counter (L4UFCNT) is intended for applications where positive and/or negative
flanks on a binary signal need to be counted.
The limit counter provides four independent limits to be checked against the
accumulated counted value. The four limit reach indication outputs can be utilized to
initiate proceeding actions. The output indicators remain high until the reset of the
function.
It is also possible to initiate the counter from a non-zero value by resetting the function
to the wanted initial value provided as a setting.
IEC 61850 IEC 60617
identification identification
CNTGGIO
S00946 V1 EN
IEC 61850 IEC 60617
identification identification
L4UFCNT
Section 12
Monitoring
ANSI/IEEE C37.2
device number
-
ANSI/IEEE C37.2
device number
-
269