Monitoring; Overview; Event Counter Cntggio; Logic - ABB REB670 Operator's Manual

Section 9
Read and change settings
9.3.8
9.3.8.1
9.3.8.2
9.3.9
9.3.9.1
9.3.9.2
9.3.9.3
9.3.9.4
9.3.9.5
62

Monitoring

Overview

Event counter settings are found under Monitoring in the Setting Group N menu.

Event counter CNTGGIO

Main menu/Setting/Setting group N/Monitoring/EventCounter(GGIO)/
CNTGGIO:x
Here the function can be set on or off.

Logic

Overview
Under Logic there are settings for Trip logic, Trip matrix, Logic gate, Logic SR
memory and Logic timer set. Under each of these function categories there are a
number of instances, each with a parameter set.

LogicGate

Main menu/Settings/Setting group N/Logic/LogicGate/GATE:x
Displays parameter settings for Operation (On or Off).

LogicRSMemory

Main menu/Settings/Setting group N/Logic/LogicRSMemory/RSMEMORY:x
Displays setting parameters for operating mode of memory function.

LogicSRMemory

Main menu/Settings/Setting group N/Logic/LogicSRMemory/SRMEMORY:x
Displays setting parameters for operating mode of memory function.

LogicTimerSet

Main menu/Settings/Setting Group N/Logic/LogicTimerSet/TIMERSET:x
Displays settable parameters for Operation (On or Off) and delay for settable timer.
1MRK505209-UEN E
Operator's manual