I in-line RF power meter capable of measuring forward and
Microphone clip installation tools
(TM8255 only)
The following installation tools may be required for installing
the TM8255 microphone:
I centre punch
I drill bit
I Pozidriv screwdriver
I hammer.
Mounting position
Inspect the vehicle and determine the safest and most
convenient location for mounting the radio.
The installation must meet the following requirements:
I sufficient clearance behind the radio for the heatsink
I a large enough flat surface so that the mounting bracket
I no danger of the radio interfering with air
reflected power at the operating frequency of the radio.
and cables
will not be distorted
bag deployment.
Installation planning 33