Led Indicators; Audible Tones - Tait TM8250 User Manual

LED indicators

LED
red
(transmit)
green
(receive)
amber
(scanning or
network)

Audible tones

Refer to page 26 for a description of other tones you may hear.
Tone type
two short beeps radio turned on: the radio is powered on
one short beep radio turned off: the radio is powered off
one short beep valid keypress: the action you have
one long, low-
pitched beep
one long, low-
pitched beep
18 Getting started
Meaning
glowing: your radio is transmitting
flashing: your transmit timer is about to expire
glowing: you are receiving
flashing: you have received a call
glowing: your radio is scanning a group of chan-
nels for activity (conventional mode) or network
service is available (MPT trunked mode)
flashing: your radio has detected activity on
a channel, and has halted on this channel
(conventional mode)
flashing fast: in trunked mode, there is no
network service available
Note: If quiet or silent mode has been turned on, you
will not hear any audible tones.
Meaning
and ready to use
attempted is permitted
invalid keypress: the action you have
attempted is not permitted
transmission inhibited: you have attempted
to transmit but for some reason transmis-
sion is not permitted at this time