Installation Tools; Selecting The Mounting Position - Tait TM8105 User Manual

Installation tools

The following installation tools may be required:
Microphone clip installation tools
The following installation tools may be required for installing
the microphone:

Selecting the mounting position

Inspect the vehicle and determine the safest and most
convenient location for mounting the radio.
The installation must meet the following requirements:
28 Installation planning
— fuse holders
— receptacles for a remote speaker (speaker not included)
— BNC or mini-UHF antenna plug.
portable drill and drill bit
Pozidriv screwdriver
8mm (5/16 inch) socket (or Pozidriv screwdriver)
BNC or mini-UHF crimp tool
fuse crimp tool
in-line RF power meter capable of measuring forward and
reflected power at the operating frequency of the radio.
centre punch
drill bit
Pozidriv screwdriver
hammer.
sufficient clearance behind the radio for the heatsink
and cables
a large enough flat surface so that the mounting bracket
will not be distorted
no danger of the radio interfering with air
bag deployment.