Direction; Fail Safe Behaviour; Reset - Siemens SITRANS F Function Manual

Setting
Default
Related
Path
3.3.2.6

Direction

Description
Totalizer 2 direction.
Setting
Default
Related
Path
3.3.2.7

Fail safe behaviour

Description
Behavior of the totalizer during the occurrence of bad input value.
Setting
Default
Related
Path
3.3.2.8

Reset

Description
Reset totalizer to zero.
Setting
Default
Related
Path
FST030
Function Manual, 04/2017, A5E35693328-AA
Auto; No decimal place; 1 decimal place; 2 decimal places; 3 decimal places; 4 decimal
places; 5 decimal places; 6 decimal places
2 decimal places
Setup → Totalizers → Totalizer 2 → Decimal places
Forward and backward; Forward; Backward; Hold
Forward
Setup → Totalizers → Totalizer 2 → Direction
RUN; totalization is continued using the bad input value; HOLD; totalization is stopped;
MEMORY; totalization is continued based on the last incoming good value
RUN; totalization is continued using the bad input value
Setup → Totalizers → Totalizer 2 → Fail safe behaviour
Cancel; OK
Cancel
Setup → Totalizers → Totalizer 2 → Reset
Setup
3.3 Totalizers
89