Siemens SITRANS F Function Manual page 121

3.4.4.5.5 Upper range value
Description
Sets value at 100% of measuring span and corresponds to Frequency value high.
Setting and Default are sensor specific, depending on the setting in Process value and
depending on the Units setting.
Setting
Default
Related
Path
3.4.4.5.6 Lower range value
Description
Sets value at 0% of measuring span and corresponds to Frequency value low.
Setting and Default are sensor specific, depending on the setting in Process value and
depending on the Units setting.
Setting
Default
Related
Path
3.4.4.5.7 Damping value
Description
Time constant of damping filter for frequency output signal.
Setting
Default
Related
Path
3.4.4.5.8 Fail-safe behaviour
Description
Frequency output reaction in case of a fault.
FST030
Function Manual, 04/2017, A5E35693328-AA
-3682800.00 kg/h to +3682800.00 kg/h
+3682800.00 kg/h
Setup → Inputs and outputs → Channel 2 - output → Frequency output → Upper range value
0.00 kg/h to +3682800.00 kg/h
0.00 kg/h
Setup → Inputs and outputs → Channel 2 - output → Frequency output → Lower range value
0.0 s to 100.0 s
0.0 s
Setup → Inputs and outputs → Channel 2 - output → Frequency output → Damping value
Setup
3.4 Inputs and outputs
119