Pulse Output - Siemens SITRANS F Function Manual

Setup
3.4 Inputs and outputs
Setting
Default
Related
Path
3.4.4.5.9 Fail-safe value
Description
Output value in case of a fault and when fail-safe mode configured to Fail-safe value.
Setting
Default
Related
Path
3.4.4.5.10 Fail-safe minimum time
Description
Minimum time the output stays in fail safe mode.
Setting
Default
Related
Path
3.4.4.6

Pulse output

3.4.4.6.1 Process value
Description
Select process value for the pulse output.
Setting
Default
120
Minimum frequency; Maximum frequency; Last valid value; Current value; Fail-safe value
Last valid value
Setup → Inputs and outputs → Channel 2 - output → Frequency output → Fail-safe behav-
iour
0.0 Hz to 12500.0 Hz
0.0 Hz
Setup → Inputs and outputs → Channel 2 - output → Frequency output → Fail-safe value
0 s to 100 s
0 s
Setup → Inputs and outputs → Channel 2 - output → Frequency output → Fail-safe minimum
time
Mass flow; Volume flow; Standard volume flow rate (only hydrocarbon and gas applica-
tions)
Volume flow
Function Manual, 04/2017, A5E35693328-AA
FST030