Decimal Places; Low Flow Cut-Off; Alarm And Warning Limits - Siemens SITRANS F Function Manual

Related
Path
3.2.1.4

Decimal places

Description
Sets the decimal places for the process value displayed in the local display.
Setting
Default
Related
Path
3.2.1.5

Low flow cut-off

Description
Volume flow limit for low flow cut off. Below limit volume flow output is forced to zero.
Setting
Default
Related
Path
3.2.1.6

Alarm and warning limits

3.2.1.6.1 Upper alarm limit
Description
Set Upper alarm limit. Alarm is triggered if measured value is above the limit.
Setting
Default
Related
Path
FST030
Function Manual, 04/2017, A5E35693328-AA
Setup → Process values → Volume flow → Custom conversion factor
Auto; No decimal place; 1 decimal place; 2 decimal places; 3 decimal places; 4 decimal
places; 5 decimal places; 6 decimal places
2 decimal places
Setup → Process values → Standard volume flow → Decimal places
0.00 m /h to 896.40 m /h (depends on sensor)
3 3
0.1% of maximum flow (depends on sensor)
Setup → Process values → Volume flow → Low flow cut-off
-896.40 m /h to 896.40 m
3
896.40 m /h
3
Setup → Process values → Volume flow → Alarm and warning limits → Upper alarm limit
/h
3
Setup
3.2 Process values
45