Gage Info; Wet Bulb Temperature; Anemometer; Trend Chart - DeFelsko POSITECTOR DPM Full Manual

Gage Info

Displays the model number & serial number, probe type & serial
number, PosiSoft.net registration key, the amount of remaining
memory for storage of readings, date and time, and software
packages. For security purposes, the registration key is required
to add the Gage to your free PosiSoft.net account.
Wet Bulb
When selected, the wet bulb temperature (Tw) is displayed on the
main screen. It is calculated from Ta and RH using an air pressure
of 1.0 atmospheres (1013 mbar). Variations of Tw at other
pressures could be greater than ±1°C (±2°F).

Anemometer

Dew point (Td) and surface temperature (Ts) are not
NOTE:
displayed when the Anemometer is enabled.

Trend Chart

Displays a real-time graph of the readings over
the last three minutes. Use Trend Charts to
monitor short-term environmental changes and
spot trends.
Shortcut:
Press the Up button to scroll
through the trend charts from the main screen.
(Advanced models only)
(PosiTector DPM-A probes only)
Surface Temperature
(Advanced models only)
12
Air Temperature &
Relative Humidity
Hot Wire Anemometer
Slide cover down to
expose hot wire
anemometer