Updates; Power Supply / Battery Indicator - DeFelsko POSITECTOR DPM Full Manual

Updates

Determines if a software update is available for your Gage. If an
update is available, a prompt will appear allowing the user to
choose to perform the update at this time or not.
To perform an update the Gage must be connected to an internet
connected PC with PosiSoft Desktop Manager (pg. 19), or WiFi
network (pg. 20).
NOTE:
Ensure that stored measurements are backed up to a PC
or PosiSoft.net. The Gage will perform a Hard Reset (pg. 11) after
completion of the update and ALL readings in memory will be
erased.
Currently installing
update 2 of 3 total
DO NOT unplug the Gage during the update operation.
!

Power Supply / Battery Indicator

Power Supply / Battery Indicator
Power Source: 3 AAA alkaline, Lithium or optional Nickel-metal
hydride (NiMH) rechargeable batteries. For best battery indicator
results, ensure the appropriate Battery Type is selected in the
Setup > Battery Type menu (pg. 13).
The battery indicator
or fully charged batteries installed. As the batteries weaken, the
bar will be reduced. When the battery symbol is low
the Gage can still be used, but the batteries should be changed or
recharged at the earliest opportunity. The Gage will turn off
automatically when batteries are very low, preceded by a Low
Battery Warning on the display.
!
To retain all user settings and stored memory readings, only
replace the batteries after the Gage has powered-down.
Battery performance decreases at low temperatures.
Updates - Sample Screen
2 / 3
displays a full bar with fresh alkaline
26
Progress bar