Setup Menu; Reset - DeFelsko POSITECTOR DPM Full Manual

Reset

Reset (soft reset) restores factory settings and returns the Gage
to a known condition. The following occurs:
• All batches, stored datasets, images and batch names are
erased.
• Menu settings are returned to the following:
Memory = OFF
Auto Log = OFF
Trend Chart = None
Auto Dim = ON
Perform a more thorough Hard Reset as follows:
1 Power down the Gage and wait 5 seconds.
2 Simultaneously press and hold the (+) and
buttons until the Reset symbol
This returns the Gage to a known, "out-of-the-box" condition.
It performs the same function as a menu Reset plus:
• Bluetooth Pairing info is cleared.
• Alarm values are set to default.
• Menu settings are returned to the following:
Units (temperature) = Celsius
Flip Display = Normal
Auto Sync .net = ON
Alarms = OFF
Alarm Sound = OFF
Sound = ON
Language = English
Anemometer = ON (DPM-A only)
NOTE:
Date, Time and WiFi are not affected by either Reset.

Setup Menu

Setup Menu
Bluetooth & Stream = OFF
WiFi & Access Point = OFF
Display = None
Anemometer = ON (DPM-A only)
11
appears.
Units (velocity) = m/s
Battery Type = Alkaline
Backlight = Normal
Bluetooth Smart = OFF
USB Drive= ON
Auto Log Interval = 5 min
Wet Bulb = OFF
center