Usb Serial Streaming - DeFelsko POSITECTOR DPM Full Manual

NOTES:
• When your PosiTector is first connected to your Windows PC via
a USB cable, an enumeration process is started that installs device
drivers without re-booting your computer. You may see several
pop-up windows in the taskbar at the bottom right of your screen.
Wait for the entire process to be completed before proceeding.
• When connected, power is supplied through the USB cable. The
batteries are not used and the body will not automatically power
down. If rechargeable (NiMH) batteries are installed, the
instrument will trickle charge the batteries.
Serial Streaming via USB
(Advanced models only, serial numbers 784000 and greater)
Advanced gage bodies have the ability to live stream datasets to
a USB connected computer. Using 3rd party data collection or
SPC software, datasets can be captured as they are taken.
This following guide provides step-by-step directions for estab-
lishing communication between the PosiTector Advanced and a
USB connected computer.
PosiTector Advanced USB Serial Streaming Instructions
http://www.defelsko.com/usb/PosiTectorAdvanced-USBserial.pdf
23