Reset
Reset restores factory settings and returns
the Gage to a known, out-of-the-box
condition. It is handy when you want to "start all over"
The following occurs:
- all batches are closed and stored measurements
are erased.
- calibration adjustments are cleared and returned
to the Gage's factory calibration settings.
- Gates are returned to default settings.
- menu setting are returned to the following:
Memory = OFF
Graphics = OFF
A more thorough Reset can be performed by holding
the (+) button when the Gage is powered down until
the Reset symbol
function as a menu Reset with addition of Units =
microns, and Language = English.
Graphics
The right hand side of the screen
can be used to display a graphical
representation of the ultrasonic
pulse as it passes through the
coating system.
Shortcut:
Press the (+) to toggle Graphics On/Off
(shortcut is active when Memory is off)
As the probe is depressed and the ultrasonic pulse
travels through the coating system, the pulse
encounters changes in density at the interfaces
Setup Menu
Setup Menu
Setup
(Advanced models only)
appears. It performs the same
Advanced models only
11
Need help?
Do you have a question about the PosiTector 200 and is the answer not in the manual?