Viewing The Treatment Screens - ResMed VPAP ST Clinical Manual

Viewing the treatment screens

Depending on how the system has been configured, you will see one of the following example screens
(shown in ST mode below) when the device is running:
ü H5i humidifier
ü Standard VPAP without
optional accessories
In S and ST modes, the fixed lines on the pressure bar indicate the expiratory and inspiratory pressures.
In CPAP mode, only a set pressure is shown. While the treatment is ramping (indicated by an orange
ramp icon below the pressure bar), the pressure values appear in orange. When a set pressure is reached
these values are displayed in white.
To toggle between treatment screens 1 and 2, press
ü Treatment with device
trigger (Timed) and cycle
(Timed, Ti Max or Ti Min)
breath indicators
ü H5i humidifier
ü ClimateLine/ClimateLine
heated air tube
ü Climate Control – Auto
ü Oximetry data via the
oximeter adapter
from your HOME screen.
ü Treatment with spontaneous
trigger and cycled breaths
ü H5i humidifier
ü ClimateLine/ClimateLine
MAX
heated air tube
ü Climate Control – Manual
MAX
15
English