Viewing the treatment screens
Depending on how the system has been configured, you will see one of the following example screens
(shown in S mode below) once therapy has started:
ü H5i humidifier
ü Standard VPAP without
optional accessories
In S, ST and VAuto modes, the fixed lines on the pressure bar indicate the expiratory and inspiratory
pressures. In CPAP mode, only a set pressure is shown. While the treatment is ramping (indicated by an
orange ramp icon below the pressure bar), the pressure values appear in orange. When a set pressure is
reached these values are displayed in white.
To toggle between treatment screens 1 and 2, press
ü (ST mode) Treatment with
device trigger (Timed) and
cycle (Timed, Ti Max or Ti
Min) breath indicators
16
ü H5i humidifier
ü ClimateLine or ClimateLine
heated air tube
ü Climate Control – Auto
ü Oximetry data via the
oximeter adapter
ü (ST mode) Treatment with
spontaneous trigger and
cycled breaths
ü H5i humidifier
ü ClimateLine or ClimateLine
MAX
heated air tube
ü Climate Control – Manual
from your HOME screen.
MAX