Table of Contents
Advertisement
•
Start the engine by remote.
•
Turn the ignition key to the
•
Press and release the
The
LOCK
While the
The transmitter will beep once.
Keep pressing the
Release the
Its LED will flash quickly.
The parking lights will flash once.
To verify whether the system is in Cold Weather Mode (automatic transmissions only):
•
Press the brake pedal:
•
If the vehicle is in cold weather mode, the parking lights will stay on while the
pedal is pressed.
Valet Mode
When the vehicle is in Valet Mode, the remote starter and alarm (if configured) functionalities are
disabled. If the vehicle needs to be serviced, or if you park it indoors, the Valet Mode will prevent
the engine from being remote-started accidentally.
Any of the following features will put your remote car starter into Valet Mode:
• Ignition Valet:
• Remote valet:
• Valet switch:
• To put the system i n t o Valet mode using the KEY (Ignition Valet Mode):
a. Insert the ignition key into the ignition switch. Within 10 sec., turn the key 5 times
successively into the
The parking lights will flash three times.
b. Turn the ignition
The LED on the antenna will come
successfully entered Valet mode.
• To put the system i n t o Valet mode using the TRANSMITTER (Remote Valet Mode):
a. Press the
UNLOCK
three times.
The LED on the antenna will come
successfully entered Valet mode.
• To put the system i n t o Valet mode using the PUSH BUTTON SWITCH (Valet Switch
Mode):
a. Insert the ignition key into the ignition switch.
b. Turn the key into the
c. Within 5 seconds, press the push button switch until the parking lights flash 3 times.
d. Release the push button and turn the ignition to the
The LED on the antenna will come
successfully entered Valet mode.
• To put the system o u t o f Valet mode using the KEY (Ignition Valet Mode):
a. Insert the ignition key into the ignition switch. Within 10 sec., turn the key 5 times
User Guide
IGNITION ON (RUN)
button.
AUX
button on the transmitter will light up.
button is still lit up, press the
LOCK
START/STOP
button.
START/STOP
This feature allows you to put your system into Valet Mode by
using the ignition key.
This feature allows you to put your system into Valet Mode by
using the transmitter.
This feature allows you to put your system into Valet Mode by using a
push button switch (optional).
To put the system i n t o Valet Mode
IGNITION/RUN
OFF
and
START/STOP
position
ON
To put the system o u t o f Valet Mode
position.
START/STOP
button until the transmitter beeps once
and
positions.
OFF
solid to indicate that the vehicle has
ON
buttons simultaneously until the parking lights flash
solid to indicate that the vehicle has
ON
OFF
solid to indicate that the vehicle has
ON
button.
position.
P. 25
Hide quick links:
Advertisement
Table of Contents
