1. Manuals
  2. Brands
  3. Autostart Manuals
  4. Remote Starter
  5. AS-2775
  6. User manual

Autostart AS-2775 User Manual

5-button automatic / manual transmission remote starter
Hide thumbs Also See for AS-2775:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Installation Manual
A U T O M A T I C
FCC USER NOTICE (U.S.A.):
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device
may not cause harmful interference, and (2) this device must accept any interference received, including interference
that may cause undesired operation.
NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to
this equipment. Such modifications could void the user's authority to operate the equipment.
DOC: 1.00
- AS-2775 -
5 - B U T T O N
/
M A N U A L
R E M O T E
AS-2775

User Guide

It is the responsibility of the vehicle operator to ensure that their
vehicle is parked in a safe and responsible manner.
1. a) Manual transmission: When leaving the vehicle, it is the user's
responsibility to ensure that the gearshift lever is in the NEUTRAL
position and the parking brake is engaged in order to avoid accidents
upon remote starting.
b) Automatic transmission: When leaving the vehicle, it is the user's
responsibility to ensure that the gearshift lever is in "Park" in order to
avoid accidents upon remote starting.
(Note: Make sure that the automatic vehicle cannot start in "Drive".)
2. It is the user's responsibility to ensure that the remote starter is disabled
or put into valet mode before servicing.
- July 7, 2008 -
T R A N S M I S S I O N
S T A R T E R
WARNING
- MO -
Made in China

Advertisement

Table of Contents
loading

Related Manuals for Autostart AS-2775

Summary of Contents for Autostart AS-2775

  • Page 1: User Guide

    NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user's authority to operate the equipment. DOC: 1.00 - AS-2775 - - July 7, 2008 - - MO -...

  • Page 2: Table Of Contents

    Table of Contents Introduction ............2 Advanced Features: Installation-programmable Using the Remote Control........3 Options..............8 Vehicle Presets............3 Passive or Active Arming of the Starter Kill ..8 Heater & Heated Seat......... 3 OEM-Style Alarm ..........8 Windshield Wipers, Radio & Headlights ..... 3 Remote Door Locks ..........

  • Page 3: Using The Remote Control

    Using the Remote Control Your Remote Car Starter is equipped with a 5-button multi-channel remote control. It can operate two independent vehicles equipped with a Remote Car Starter (see Multi-Car Operation section, later in this Guide, for second-car transmitter functions). The functions of the transmitter are as follows: Picture serves as example only.

  • Page 4: Remote-Starting Your Vehicle

    - Once the activation countdown expires, the LED will send a series of quick double flashes to indicate that the Starter Kill is now armed. • To disarm the Starter Kill, press the button on the transmitter. UNLOCK - The Starter Kill will automatically rearm itself after 1 minute (by default) or 3 minutes (if configured this way) if no door is left opened (if the doors are monitored) and the ignition is not turned Active Mode:...

  • Page 5: Remote-Starting

    Press for approx. 1 second either: to lock the doors and shut down the engine; LOCK to unlock the doors and shut down the engine; UNLOCK to shut down the engine without affecting the doors. START Note: The vehicle will also enter Ready Mode once the engine run time expires. Remote-starting Press the button for approximately 1 second.

  • Page 6: Valet Mode

    Note: If the pre-programmed run-time expires or if the user shuts down the engine by remote control, the vehicle will enter Ready Mode. Caution!!! Do not leave children or pets unattended in a vehicle standing in Idle Mode. Valet Mode When your vehicle is in Valet Mode, the remote starter and alarm (if configured) functionalities are disabled.

  • Page 7: Panic Mode

    • To put the system o u t o f Valet mode using the PUSH BUTTON SWITCH (Valet Switch Mode): a. Insert the ignition key into the ignition switch. b. Turn the key into the position c. Press the push button switch until the Parking lights flash twice. d.

  • Page 8: The Starter Kill And The Anti-Grind Feature

    • If the vehicle is in cold weather mode, the parking lights will remain while the brake pedal is pressed. The Starter Kill and the Anti-grind Feature With this added security feature, the system will prevent your vehicle from starting with the ignition key when the Starter Kill is armed.

  • Page 9: Priority Door Access

    Priority Door Access If the Remote Door Locks option is installed on your vehicle, this safety feature allows you to unlock solely the driver’s door with a single press of the button on the transmitter; upon a UNLOCK second press of the button within 6 seconds, all the other doors will unlock.

  • Page 10: Turbo Mode

    The system will warn you if someone attempts to start your vehicle while it stands in Home Valet Mode: • The parking lights will: Turn then ; then Flash twice, pause; then Flash twice again. Turbo Mode If Turbo Mode is configured at installation, it will allow a turbocharger to idle down after the user leaves the vehicle: the unit will take over the vehicle and keep it running for 60 seconds (or until it is shut down by remote control), then shut down the engine.

  • Page 11: Multi-Car Operation

    Multi-car Operation This option allows the owner of two vehicles, both equipped with the same Remote Car Starter model, to control both systems with a single remote control. To control the second vehicle, simultaneously press the button and the button of the function you wish to use. TRUNK Note: Your remote control must be configured for second car operation by the installer.

  • Page 12: Limited Lifetime Warranty

    For the first two years after the date of manufacture, as specified by the serial number on the module, Autostart will replace the remote starter module free of charge with a new remote starter module. For the third year and any consecutive year after the date of manufacture, as specified by the serial number on the module, Autostart will provide to the original consumer purchaser a new remote starter module, for a repair charge of $25.00 USD.

Table of Contents