Table of Contents
Advertisement
successively into the
The parking lights will flash twice.
b. Turn the ignition
The LED on the antenna will flash quickly to indicate that the vehicle is now out of
Valet mode.
• To put the system o u t o f Valet mode using the TRANSMITTER (Remote Valet Mode):
a. Press the
UNLOCK
twice.
The LED on the antenna will flash quickly to indicate that the vehicle is now out of
Valet mode.
• To put the system o u t o f Valet mode using the PUSH BUTTON SWITCH (Valet Switch
Mode):
a. Insert the ignition key into the ignition switch.
b. Turn the key into the
c. Press the push button switch until the Parking lights flash twice.
d. Release the push button and turn the ignition to the
The LED on the antenna will flash quickly to indicate that the vehicle is now out of
Valet mode.
"Home Valet™" Mode
If configured at installation, this feature will set the vehicle to a no-remote-start mode: if the vehicle
is parked indoors, there is no danger of it starting accidentally by remote control.
Note: Once the home valet mode is activated, the vehicle will not start by remote but the
OEM alarm functions and starter kill will still be enabled.
To take the system i n t o home valet mode:
• Press the
or
LOCK
• Within 3 seconds, press the
The parking lights will come
To take the system o u t o f home valet mode:
• Turn the ignition key to the
The system will warn the user if someone attempts to start the vehicle while it stands in Home
Valet Mode:
• The parking lights will:
Turn
then
ON
Flash twice, pause; then
Flash twice again.
Panic Mode
Note: Panic mode can only be activated if the horn has been adequately configured.
In an emergency situation, you can activate panic mode by pressing and holding the
button for more than 3 seconds, until the horn starts honking. If the vehicle is under a remote start,
the engine will shutdown automatically before setting off the horn. You can stop the horn by
pressing:
(this will lock your doors and deactivate panic mode), or
(this will unlock your doors and deactivate panic mode).
Furthermore, the panic mode can be stopped by activating one of the following three (3) features:
a)
Remote valet (pressing
b)
Ignition valet (turning the key inside the ignition switch from
P. 26
IGNITION/RUN
OFF
and
START/STOP
position
ON
button.
UNLOCK
START/STOP
for 2 seconds, then turn
ON
IGNITION ON (RUN)
; then
OFF
UNLOCK
and
positions.
OFF
buttons simultaneously until the parking lights flash
OFF
and
buttons simultaneously.
LOCK
OFF
position.
and
for at least 3 seconds)
START/STOP
position.
.
to
6 times in a row)
OFF
ON
START/STOP
User Guide
Hide quick links:
Advertisement
Table of Contents
