Table of Contents
Advertisement
Press the Back into place and hold for about a minute (12). If necessary, add a small bead
of glue to the inside of the joint between Back and Bottom (13).
12
5. Install the Front in exactly the same manner as the Back (14, 15)
14
6. Install the Magnets.
a. Your kit includes 8 tiny, powerful magnets. They are polarized: they like to stick together only
when stacked a certain way. You will need to keep track of their polarity, so stack up all the
magnets and mark one end with a marker. Set that magnet aside; mark the next magnet and
repeat until you have marked one side of every magnet (16).
16
13
15
39
Advertisement
Table of Contents
