Building The Plastic Cabinet Kit - Zeppelin Design Labs MACCHIATO Assembly Manual

BUILDING THE PLASTIC CABINET KIT

Zeppelin Design Labs offers a nifty black plastic cabinet kit. It is rugged, and quick and easy to
assemble.
WHAT YOU WILL NEED
1. X-Acto knife or other sharp hobby knife
2. Some medium and fine sandpapers (180, 240 and 320 grit, more or less)
3. Plastic cement (for styrene), liquid in a jar or gooey in a tube
4. Super Glue (cyanoacrylate). Liquid is fine but gooey is better.
5. A few binder clips
Let's Begin!
1. Lay out the parts as shown to familiarize yourself with their names and orientation. You are
looking at the inside surfaces (1). The inside surface is shinier than the outside: lay out all parts
shiny-side up. An exception is the Bottom. Be VERY CAREFUL to orient the Bottom correctly! Place
your Macchiato over it to verify the center standoff lines up with the center hole. The Bottom may
show either the shiny or dull side up.
1
36