Table of Contents
Advertisement
4. Capacitors: There are three different types of capacitors in the kit: ceramic (15), film (16) and
electrolytic (17). We will place them in the PCB one type at a time, and then solder them all in at
once.
15
17
a. Ceramic Caps: There are six 100nF yellow ceramic caps (C1,C2,C3,C4,C5,C14). We
will install five of them now and one of them toward the end of the assembly process.
Place capacitors C1, C2, C3, C4, and C5 in their respective places on the PCB and bend
the leads out on the back so they don't fall out. Like the resistors, these capacitors are not
polarized. It doesn't matter which lead goes into which hole.
18
20
16
19
14
Advertisement
Table of Contents
