Installing the Router
Figure 26: Mounting the Cisco ASR-920-24SZ-M, ASR-920-24TZ-M Router on the Wall
When mounting the Cisco ASR 920-24SZ-IM, ASR-920-24SZ-M, ASR-920-24TZ-M Router vertically,
Caution
ensure that the power supplies are at the bottom.
When mounting the ASR-920-24SZ-1M to a wall, you must install the drip tray (Cisco part number
Caution
700-47267-01) as shown below to meet IEC 60950-1 product safety requirements.
To install the drip tray for Cisco ASR-920-24SZ-IM Router, complete the following steps:
Step 2
Place the drip tray below the router as shown in the figure above.
Step 3
Tighten the four screws to affix the drip tray to the wall.
Cisco ASR-920-24SZ-IM, ASR-920-24SZ-M, ASR-920-24TZ-M Aggregation Services Router Hardware Installation
Mounting Routers on the Wall
Guide
65