Connecting To The Eia Console Port - Cisco ASR-920-24SZ-IM Hardware Installation Manual

Connecting to the EIA Console Port

DETAILED STEPS
Step 1 Choose Start > Control Panel > Add or Remove Programs (Uninstall a program).
Step 2 Scroll to Windows Driver Package - Exar corporation (xrusbser) Ports and click Remove. The Program Maintenance
window is displayed.
Step 3 Click Yes to uninstall the driver.
Connecting to the EIA Console Port
The US-to-RJ45 adapter cable and the DB9 console cable are not included with the Cisco ASR
Note
920-24SZ-IM, ASR-920-24SZ-M, ASR-920-24TZ-M Router; they can be ordered separately from Cisco.
The serial console cable kit is not included with the Cisco ASR 920-24SZ-IM, ASR-920-24SZ-M,
Note
ASR-920-24TZ-M Router; it is ordered separately.
To connect a terminal to the EIA Console port on the router, follow these steps:
SUMMARY STEPS
1. Connect the USB end of the USB-to RJ-45 cable to the EIA Console port.
2. Connect the RJ-45 end of the DB-9 adapter cable to the USB-to RJ-45 cable, as shown in the figure below.
3. Connect the DB-9 end of the console cable to the DB-9 end of the terminal.
4. To communicate with the router, start a terminal emulator application, such as Microsoft Windows
HyperTerminal. This software should be configured with the following parameters:
Cisco ASR-920-24SZ-IM, ASR-920-24SZ-M, ASR-920-24TZ-M Aggregation Services Router Hardware Installation
Guide
108
Installing the Router