Installing The Router; Prerequisites - Cisco ASR-920-24SZ-IM Hardware Installation Manual

Installing the Router

This chapter describes how to install the Cisco ASR 920-24SZ-IM, ASR-920-24SZ-M, ASR-920-24TZ-M
Router.
•
•
•
•
•
•
•
•
•
•

Prerequisites

Before installing the Cisco ASR 920-24SZ-IM, ASR-920-24SZ-M, ASR-920-24TZ-M Router, it is important
to prepare for the installation by:
• Preparing the site (site planning) and reviewing the installation plans or method of procedures (MOP).
• Unpacking and inspecting the Cisco ASR 920-24SZ-IM, ASR-920-24SZ-M, ASR-920-24TZ-M Router.
• Gathering the tools and test equipment required to properly install the Cisco ASR 920-24SZ-IM,
For more instructions on how to prepare for the installation of the Cisco ASR 920-24SZ-IM, ASR-920-24SZ-M,
ASR-920-24TZ-M Router, see Chapter 2, Preparing for Installation.
Prerequisites, page 49
Installing the Router in a Rack, page 50
Wall Mounting the Routers, page 61
Installing and Removing the Interface Module, page 66
Installing and Removing the Fan Tray, page 70
Installing the Power Supply, page 76
Installing and Removing SFP Modules, page 90
Connecting to the 10/100/1000 Ports, page 96
Installing the Chassis Ground Connection, page 98
Connecting a Router to the Network, page 103
See Site Planning section.
See Receiving the Router section.
ASR-920-24SZ-M, ASR-920-24TZ-M Router. See Tools and Equipment section.
Cisco ASR-920-24SZ-IM, ASR-920-24SZ-M, ASR-920-24TZ-M Aggregation Services Router Hardware Installation
3
C H A P T E R
Guide
49