Connecting To The Console Port Using Mac Os X - Cisco NCS 560-4 Hardware Installation Manual

Connecting to the Console Port using Mac OS X

Figure 48: Connecting the USB Console Cable to the Cisco NCS 560-4 Router
1 USB Type-A console port
3 USB Type-A
Connecting to the Console Port using Mac OS X
This procedure describes how to connect a Mac OS X system USB port to the console using the built in OS
X Terminal utility.
Procedure
Use the Finder to go to Applications → Utilities → Terminal.
Step 1
Step 2
Connect the OS X USB port to the router.
Step 3 Enter the following commands to find the OS X USB port number:
Cisco NCS 560-4 Router Hardware Installation Guide
94
2 USB 5-pin mini USB Type-B to USB Type-A console cable
— —
Installing the Cisco NCS 560-4 Router