Ablerex BRIC30S User Manual page 14


All of the functions are listed in the following table:
Menu Functionality
Mimic Display
Command
Identification
Measurements
Monitor
Maintenance
Code
Version
Configuration
Date and Time
General
Setting
Language
Update Prog.
Event Log
Log on Load
Maintenance
Description
This function is mainly used to display
important information such as the monitor
readings, UPS mode and alarms.
The user can use this function to issue
boot, shutdown, and change mode
commands to the UPS.
Display the default system information.
Real-time display of all monitor-readings
including input and output voltage/current,
bypass, load and battery.
Displays the error code of the UPS to help
the technician quickly diagnose the
system problem.
Display the current software and firmware
version.
1. Set alarm functions.
2. Set input, output and bypass display
options.
Set the current date and time of the UPS.
Backlight Delay Time.
Default language is English. Other
languages can be set as default through
this function.
Update the program.
Display a detailed list of UPS events
including status, alarms and commands.
A graphical display of load data.
Key in the password "3001" to execute
Screen Calibration.
26
5.1.3. Mimic Display

Block A (Rectifier), Block B (Bypass) and Block C (Inverter) use
show that a particular system block is not active or not connected;
shows that a system block is active; When
system block has experienced an error.

Block D, E, and F use
not available because a particular system block is not active or not
connected. shows that the system block is active and real-time
monitor readings are available; When
block has experienced an error.

Block G shows the current battery status. When battery is not online then it
； When batter is charging, the progress display is green
is shown as
as pictured below:
When batter is discharging, the progress display is yellow as pictured
below:
is shown then that
to show that real-time monitor readings are
is shown then that system
27
to