Ablerex BRIC30S User Manual page 17

5.1.10. Log on Load
Clicking on Main→Log on Load displays the tri-phase load record of the UPS
as pictured above. A description of each block is provided below:

When Block A is shown then data is being updated.

Block B is the filter and when grayed out it means that log is not shown on
the graph.

Block C is the time interval option. Available intervals are 1 hour, 4 hours
and 1 day. Block D will display the information using the selected time
interval.

Block D is the time axis.

Click on the left and right buttons in Block E to select the logs from different
time periods.
Attention: Logs are kept for up to 3 days. Data older than 3 days will
be automatically erased.
32
5.1.11. Screen Calibration
Please aim and press the center of the target accurately. Repeat the motion
described above as the target moves around the screen until the display shows
pictured below.
Then press any point of the screen to back to the menu.
33
as