Table of Contents
Advertisement
D Wall Mounting
The display unit can be mounted to a flat surface,
such as an instrument panel, using the M6 mounting
bolts.
1. Remove the four screw hole seals from the four
corners of the display unit.
BE CAREFUL! NEVER use your finger nail to
remove the seal. Otherwise, you may injure your
nail.
2. Using the display unit template that comes
with the display unit, carefully cut a hole in the
instrument panel, or wherever you plan to mount
the display unit.
3. Drill four holes for the mounting screw.
L The screw hole depth is 14.5 mm (
Screw hole seal
Flat
washer
Spring washer
M6 mounting bolt
9
/
inches).
16
INSTALLATION AND CONNECTIONS
4. Slide the display unit through the hole.
5. Attach the four corners of the display unit
using the flat washers, spring washers, and M6
mounting bolts.
L Select the mounting bolts of the length that fits the
thickness of the instrument panel.
Screw hole depth: 14.5 (
Screw hole
Instrument panel
Screw hole
Instrument panel
Side view
14
9
/
)
16
M6 mounting bolt
Flat
washer
Spring washer
Unit: mm (inch)
56
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
Hide quick links:
Advertisement
Table of Contents
