Icom MR-1010RII Instruction Manual page 21

D Setting the magnetic variation
1. Push [MENU]/[ ].
2. Push [t] or [u] to select the System menu.
3. Push [p] or [q] to select the "Variation" item.
4. Push [ENTER]/[ ] to enter the option selection
mode.
5. Push [t] or [u] to select the bearing variation.
L "Auto"* and "Manual" are selectable.
6. Push [ENTER]/[ ] to save the setting.
7. When the "Manual" option is selected in step 4,
push [q] to select the "Manual Variation," then
push [ENTER]/[ ].
8. Push [p] or [q] to set the bearing variation.
9. Push [ENTER]/[ ] to save the setting.
10. Push [MENU]/[ ] to exit the Menu screen.
NOTE:
• NMEA data is required for the Auto variation. NEVER
select "Auto" without NMEA data or incorrect variation
data may be entered.
• Until an effective variation is received, use 0° for
difference between true North and magnetic North. After
an effective variation is received, use the last data for
the difference. The MR-1010RII memorize the data until
you turn OFF the power.
(MENU w System w Variation)
BASIC OPERATION
2
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
16