Timeout; Using The Command/Response Table - Extron electronics MTP SW6 User Manual

Six input mtp twisted pair switcher

Hide thumbs Also See for MTP SW6:

Table of Contents

Timeout

Pauses of 10 seconds or longer between command ASCII characters result in a timeout.

The command operation is aborted with no other indication.

The command/response table begins on page 23. Lower case letters are acceptable in

the command ield except where indicated for the audio level (gain and attenuation)

commands. Symbols are used throughout the table to represent variables in the

command/response ields. Command and response examples are shown throughout the

table. The ASCII to HEX conversion table below is for use with the command/response

table.

ASCII to HEX Conversion Table

Space

MTP SW6 • Remote Control

Table of Contents

Do you have a question about the MTP SW6 and is the answer not in the manual?